4 Stroke 6HP Outboard Motor
video

4 Stroke 6HP Outboard Motor

Low noise,low emissions
Portable, fuel efficient, eco-friendly
5-layer coated finish
Compact and tidy internal structure
Recommended rubber dinghy length: 2.7-3m
Send Inquiry

Description

Technical Parameters

About Outboards

 

CALON GLORIA is committed to user-centered design, environmental friendliness, performance, and reliability. The goal is to provide well-matched design solutions that are simple and convenient to use.

 

 

Features of the 4-stroke 6HP outboard motor 

 

  1. The carburetor is designed with a tilt-resistant structure, allowing the boat to maintain a smooth fuel supply system even when tilted between 40° and 45°.
  2. The carburetor is equipped with two fuel inlets; one connects to the engine's fuel pump, while the other connects to the built-in fuel tank, featuring an automatic pump to facilitate engine starting.
  3. The gearbox uses spiral bevel gears to enhance strength, reduce noise, provide a higher reduction ratio, and extend service life.
  4. It maintains normal operation at -5°C, during rapid deceleration, and under zero-speed rapid acceleration.
  5. The optimized design incorporates anti-weed and anti-fishing net winding features with a clever structural design.
  6. The lubrication system is equipped with a dipstick and a visual dipstick window for more intuitive monitoring.
  7. It has a larger displacement, providing an output power increase of 3-5%.
  8. The wet sump and forced lubrication system better protect the engine.
  9. The digital CDI ignition system allows for easy starting and quick throttle response, making manual starting fast, agile, and reliable.

 

Other advantages:

  • Bold design with a large handle for easier carrying and operation. In addition to the built-in 1.1L fuel tank, it includes a switch to connect an external fuel tank and plug, making it simple, quick, and effective to use.

 

Company

 

Based on the principle of excellence, we have successively launched 2-stroke outboards:3hp/5hp/9.8hp/15hp/20hp/30hp/40hp, 4-stroke outboards:6hp/20hp/60hp EFI and electric outboards: 40hp. In terms of technological innovation, we have also achieved notable results. As of July 24, 2023, we had obtained 25 patents, covering various fields such as outboard motor oil supply system devices, yaw test devices, and underwater gear nut fixing and tightening devices. In response to the issue of virtual horsepower marks in the market, we have always adhered to the principle of genuine horsepower, earning gradual praise from consumers.

 

Real Shots

 

Partnering with charitable organizations to provide rescue equipment. 

product-984-656
product-982-655
product-1001-667
product-984-656

2018 Huaihe River Rescue Drill 

Mounting the outboard motor

 

The outboard motor should be mounted so that the boat is well balanced. Otherwise, the boat could be hard to steer. For single-engine boats, mount the outboard motor on the centerline (keel line) of the boat.

 

Mounting height

 

To run your boat at optimum efficiency, the water resistance (drag) of the boat and out-board motor must be made as little as possible. The mounting height of the outboard motor greatly affects the water resistance. If the mounting height is too high, cavitation tends to occur, thus reducing the propulsion; and if the propeller tips cut the air, the engine speed will rise abnormally and cause the engine to overheat. If the mounting height is too low, the water resistance will increase and thereby reduce engine efficiency. Mount the outboard motor so that the anti-cavitation plate is between the bottom of the boat and a level 25 mm (1 in) below it.

 

Hot Tags: 4 stroke 6hp outboard motor, China 4 stroke 6hp outboard motor manufacturers, suppliers, factory, Marine Outboard Engine, 4 Stroke 6HP Outboard Motor, Four Stroke Outboard Engine Oil, 4 stroke outboards, Portable Outboard Engines, New Boat Engines Outboard

4 Stroke 6HP Outboard Motor

 

MODEL F6
Type 4 Stroke
Transom Height 435mm (S) 562mm(L)
Dimension 750*403*1040 mm (S) / 750*403*1167 mm (L)
Dry Weight 27 kg (S) 28kg (L)
Max. RPM range 4500~5500r/min
Max. Outpower 4.4kW(6HP)
Idling RPM range 1550±50 r/min
Engine type 1-cyl.
Displacement 139 cc
Bore x stroke 62 x 46 mm
Ignition Timing CDI
Steering System Tiller handle
Starting System Manual start
Gear Shift F-N-R
Gear Ratio 2.08(27/13)
Trim &Tilt Manual
Fuel Tank Capacity External 12L
Gear Oil Capacity 0.1 L
Propeller 7 1/2X8-BL

 

Send Inquiry